GarageBand “Female Basic” Chain and Settings?

GarageBand Icon 1024x1024Hey all!

Hope you’re well.

I’ve been working with a friend recently and she initially sent me some stuff that she recorded via GarageBand with a “Female Basic” instrument setting. We then later re-recorded into Live, but we’re finding that we actually like the versions she sent me. Now part of it is that I’m a mix/recording noob, and if I weren’t could easily emulate the sound in Live in about 5 minutes, but in the effort of just moving our sessions along, anyone know the chain and settings for the “Female Basic” Instrument in GarageBand?

I tried checking on the GarageBand in my iPad v1, but no such Instrument and it’s all up to date. Worst case she can drag her Mac over or I can go over and write down every last setting I suppose, but figured one of you savvy peoples may know.


Integral Knowledge for Producers/Noob Mix Engineers







Came across this a bit ago, and been meaning to share.  Definitely one of those “oh, WOW” lightning bolt moments in my brain that come too rarely (jokes as you like on that one).


The hardest part I feel for producers is getting the low end SOLID. You listen to your favorite tracks, which just sound so clean so full…beautiful ( if your a production nerd like me, this can be the case) .  You want to get your low end to sound the same, you want it to PUNCH through the mix and have power. More often then not, your left with a rumbling mess of 50hz noise that doesn’t sound punchy or powerful. It just sounds like a wall of shit. I had this problem for years, I’d think ” ( pro’s ) bass range sounds SO simple, so clean….the funny part was, the answer was in my question the entire time.

Sequencing Maschine Drum Tracks with Ableton Push Controller Update

Mid-summer I got my hands on Ableton Push and was floored.  So. Much. Damn. Awesome. Instrument. (obligatory overused doge meme image here).  I had been using NI Maschine for a while, which is pretty cool in it’s own right, but I never loved it’s built-in sequencer.  The workflow and sounds though . . . if only I could easily sequence them in Ableton Live somehow!

Ultimately after much trial and error, I came up with a workflow that worked.  I documented it on the Live forums, and then (great service, I’ve been slacking!) picked up on it and I guest blogged there about it.

Anyway, fast forward several months and Native Instruments released v2 of Maschine’s software.  Great update, but in doing so, they broke a few workflow things, which sent me back to the drawing board.  Annoyingly I had to wait for a few sub-updates first, but now it’s all back in action.

So, here’s the update to how to set it up with v2:

In Live:

  • Create a Midi track and name it Maschine A.
  • Put  an instance of Maschine on the Maschine A track, right click on the instrument and select Group to Drum Rack in the menu.


  • Set Maschine receive in drum rack to All (click on the I-O button on the bottom left of the Drum Rack to expand to see this menu).



In Maschine:

  • Click the group A1, then click Group, then click Input.  It should look like the below (specific items highlighted in white).maschine2-1
  • In the MIDI section, turn “Active” on and set the Channel to 1 ( as seen below).


You can now trigger and sequence that group using the Ableton Drum Rack and Ableton’s clips!

If you want to have multiple groups triggered independently each from their own Ableton Drum Racks on dedicated tracks, this is also possible using these additional steps:

In Live:

  • Create 7 additional Midi tracks and name them Maschine B, Maschine C, Maschine D, etc;, The letter is to reference the Maschine group.
  • Select all 8 tracks and group them (Command-G). Name the group Maschine.
  • Add an Ext Instrument to B, C, D, Etc.
  • Set each Ext Instrument MIDI To: Maschine A and then the associated Maschine output – for example doing this for Maschine B, the 2nd dropdown in the external instrument should read 2 – Maschine. Do the same for C (would be MIDI to: Maschine A and 3 – Maschine), and D, and how many other Maschine groups you plan on using.
  • Set the Audio From in the external instrument to the corresponding Maschine external output. For simplicity this should be the same number as the midi channel for that group: Maschine B’s external instrument will read Audio From – Out 2/-Maschine. Therefore Maschine B will be on Midi channel 2, AND audio from Out 2/-Maschine.


  • To make each Ext Instrument function as a Drum Rack (note this is with using Push’s drum rack mode in mind), right click on each Ext Instrument and select Group to Drum Rack. Follow the same steps as in Maschine A with regards to the receive in the Drum Rack (all).


In Maschine:

  • Starting with Group B, click the Group section in Maschine and then the Output button. Under Audio, set the Dest. to the associated channel. E.g. B would be Ext 1, C would be Ext 2, D would be Ext 3, etc.



  • If you want to use a VST/synth (e.g. Massive which now comes with Maschine for free), there’s a slight change to the MIDI routing.  Instead of making MIDI under the Group active as you did above, leave that off, and under Sound make that active.  Like so:



Now you can have potentially 8 separate Ableton drum racks, each controlling their own group in Maschine controlling everything with just the Push! 

Good luck and hopefully you’ll find this technique helpful in some way, even if it’s just a jump off point for your own setup.

I reached out to a bit ago about updating their blog, but no word back.  Will try to get an updated template up as well so you can just pull it down, save it as your own, and roll.

Happy Beatmakin’!